"Object Reference Not Set" error when running Integration Manager with eConnect Adapter

I have seen a number of forum posts around this subject and have even received a few calls for help in troubleshooting the issue. In the occassions I have assisted someone, I have noticed that most of the time the developer or consultant was using an event or field script of some kind, which almost always attempts to get some information from Microsoft Dynamics GP.

So, in an attempt to reproduce the problem, I have recreated the following VBScript based on a recent case:

' Created by Mariano Gomez, MVP
'  This code is licensed under the Creative Commons 
'  Attribution-NonCommercial-ShareAlike 2.5 Generic license.

Dim objConn, objRec, cmd, sJE
 

set objConn = CreateObject("ADODB.Connection")
objConn.ConnectionString = "database=" & GPConnection.GPConnInterCompanyID
GPConnection.Open(objConn) 
 

Set cmd = CreateObject("ADODB.Command")
cmd.ActiveConnection = objConn
 
cmdString = "SELECT NJRNLENT FROM GL40000;" 
Set objRec = objConn.Execute(cmdString)

if Not objRec.Bof and Not objRec.Eof then
  objRec.MoveFirst
  CurrentField = objrec.fields(0).value
end if
  
'Close recordset when finished
Call objRec.Close
  
'Close connection when finished
Call objConn.Close
 
Set cmd = Nothing
Set objConn = Nothing

NOTE: This script purposefully contains errors and does not follow best practices. It was recreated to illustrate the issue on the subject.

In summary, the above script was added by the consultant to retrieve the next journal number for a GL Transaction integration with the eConnect Adapter. The consultant reported the script working on and off on the server and not working on the workstations. However, in each case the error reported by Integration Manager is as follows:

Opening source query...
Establishing source record count...
Beginning integration...

DOC 1 ERROR: Error Executing Script 'GLTransaction.Journal Entry#' Line 9: - 
[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
Integration Failed
Integration Results
    1 documents were read from the source query.
    1 documents were attempted:
        0 integrated without warnings.
        0 integrated with warnings.
        1 failed to integrate.

The error indicates the is a problem with the data source name not being found, which leads to an object reference problem when the connection is attempted. But why would this code work on the server at times and not work on the client? Then it hit me!

The GPConnection object retrieves the connection and login information for the user currently signed on to Microsoft Dynamics GP... and therein lies the issue! The GPConnection object actually requires the Microsoft Dynamics GP user interface to be active for the object to retrieve the connection information, which is typically not the case for eConnect Adapter-based integrations.

As a side note, the times the integration did work, the user interface HAD to be active, but this was not apparent to the consultant.

So, how can we adjust this integration to follow best practices and work without the Microsoft Dynamics GP user interface having to be active?

The answer is relatively simple. The above code will need to switch out the way it obtains the connection string for an actual (as in hardcoded) connection string. 

'
objConn.ConnectionString = "Provider=SQLNCLI10;Server=yourSQLServerName;_
Database=YourCompanyDB; Trusted_Connection=yes;"

Because the script uses a trusted connection to the database (a best practice), it is advisable that proper permissions be granted to the user's domain account on SQL Server in order for the integration to be successful. The domain account will also need to be added to the DYNGRP role. What many customers have done is created specific domain accounts to execute eConnect integrations under a trusted connection. This further limits the exposure to security breaches.

For a final look at a technique to implement the above script, see the following article on this site:

Integration Manager: Integrating journal entries with Analytical Accounting Information

Hope you found this post useful.

Until next post!

MG.-
Mariano Gomez, MVP
IntellPartners, LLC
http://www.IntellPartners.com/

Comments

Unknown said…
I had a similar issue, but GP was open and I was logged into the company. I then found out that if you have Dexterity open, it will not work sometimes (IM might be trying to pick up the connection information from there). Therefore, it's a good practice to close Dexterity before running your integration.
August 21, 2012 at 5:10 PM
Post a Comment

Popular posts from this blog

DBMS: 12 Microsoft Dynamics GP: 0 error when updating to Microsoft Dynamics GP 2013 R2

Image
Hello all! It's been quite a while since I've actually written anything of remote interest to anyone who follows my blog, but at the same time, you will be pleased to know that I've been quite busy in the consulting front, with upgrades, server migrations, complex multi-instance postings involving 10's of thousands of transactions, wrapping up some Field Service Automation projects, and the list goes on and on. This time around I want to bring to the forefront, an issue I encountered updating  from Microsoft Dynamics GP 2013 SP2 to Microsoft Dynamics GP 2013 R2 plus the latest service pack. Background My client requested a server migration to a new environment where they wanted to deploy Dynamics GP 2013 R2 web client (plus the latest service pack) and upgrade their relational database management system to Microsoft SQL Server 2014. This is something I'm absolutely comfortable with (for the most part) given also that my client was sitting at Microsoft Dynamics...
Read more

Do I have to use those "Z-" currency IDs in GP?

Image
I know this seems like a trivia question, but recently I have come across a number of clients who have been using Microsoft Dynamics GP for a number of years and have been told by their former partners that they *must* use the predefined currency IDs created after adding the sample company, with no real explanation to support these claims. Case in point, my new client in Saudi Arabia, has been struggling for years to understand why they were told to prefix all currency IDs with the "Z-". So they went ahead and setup "Z-SR" for the Saudi Real. If you are familiar with Microsoft Dynamics GP and the sample company, Fabrikam, you may have noticed by now that after adding the sample company (which is not a requirement by any means), you will get a number of predefined currencies such as Z-US$ (US Dollars), Z-UK (British Pounds), Z-C$ (Canadian Dollars), Z-AUD (Australian Dollars), and so forth, accompanied by a number of exchange rate tables. If you are not familiar wi...
Read more

Microsoft Dynamics GP Scrolling Windows and Line Sequence Numbers

Image
I thought I would write about something meaningless that no one really thinks about. However, I realized that this is a compelling topic since it makes for some interesting discussion around the ability to insert line items withinin most transaction scrolling windows. Let’s take some time to understand where Line Sequence Numbers come from. A Line Sequence Number is auto generated by Dynamics GP and uses a seed value of 16,384 as a basis for the first line. Each subsequent line in the scrolling window is incremented by this number, so line number 2 would have a Line Sequence Number value of 32,768, line number 3 would have Line Sequence Number Value of 49,152, and so on. Since most GP transaction entry scrolling windows allow inserting rows in between line items, the newly inserted Line Sequence Number value is calculated as an average between the previous and the next line item sequences, i.e., if you were to insert an item in between row 1 and row 2 in the scrolling window -- keep in...
Read more